BathyBot: A robot wakes up in the depths of the Mediterranean

Biology
Environment
Engineering

 

 

  • BathyBot is the first deep-sea robot permanently installed in Europe, more than 2400 meters deep.
     
  • It has just begun its mission in the Mediterranean Sea and has unveiled the first images of its environment.
     
  • Accompanied by an artificial reef and a battery of instruments, BathyBot will study the biodiversity, bioluminescence and biogeochemical processes of the seabed.
     

BathyBot has just woken up at the bottom of the Mediterranean Sea, 2400 meters below the surface. It is the first remotely operated mobile robot installed so deeply and also the first that will continuously document the colonization of an artificial reef in this environment, as part of a mission led by a CNRS team. BathyBot, the BathyReef artificial reef, and other oceanographic instruments were deployed in the Gulf of Lion by the French Oceanographic Fleet operated by IFREMER.

It will not explore another planet, but an environment that we know almost as little about. Since April 19, BathyBot has been observing the Mediterranean sea floor, more than 2400 meters deep. The world’s first scientific robot permanently installed at such a depth, together with other instruments, it will study this environment and its characteristics in real time thanks to its high-speed connection, for at least five years.

Imagined scientifically by teams from the Institut Méditerranéen d'Océanologie (CNRS/Aix-Marseille Université/IRD/Université de Toulon)1 and technically by the Division Technique of the Institut National des Sciences de l'Univers du CNRS, BathyBot carries sensors to measure parameters including temperature, salinity, current speed and direction, particle flow and oxygen concentration. It will analyse the surrounding bioluminescence using a hyper-sensitive camera.

BathyBot will study the biodiversity of the deep sea at its site of operation, the impact of water movements on these ecosystems, the carbon cycle and how those change in the Mediterranean’s deep waters in the face of atmospheric disturbances, and also acidification, evolution of temperature and oxygenation. Remotely operated from land, it will be the eyes of scientists in this unknown world.

They hope to be able to observe the colonization of the artificial BathyReef reef that has been placed alongside the robot. This was made of concrete, an inert and mineral material, and from a complex bio-inspired structure offering a large colonizable surface. The research laboratory at architecture firm Rougerie+Tangram designed BathyReef, optimizing the use of resources, including an open structure. It was then created in 3D-concrete printing by the Vicat group. The duo formed by BathyReef and BathyBot will be the first to offer monitoring of the colonization of an artificial reef deliberately immersed at such depths.

They had been set up in February 2022, during a mission at sea led by the ship the Pourquoi pas? and the Nautile submarine, both part of the French oceanographic fleet operated by IFREMER. A seismometer, a radioactivity probe, and a biocamera to observe passenger events and test light stimulation scenarios of deep species were also installed. These instruments and BathyBot have all been connected to the scientific junction box developed by IFREMER. This smart network acts as both a ‘power strip’ to power them and a ‘high-speed internet box’ to control them and send the acquired data in real time to land.

Unfortunately, BathyBot has remained too long without a power supply, since the system moving it on the bottom is not currently operational. Disappointment about this was quickly overcome by the exceptional images already acquired, after only a few days, through the robot’s two cameras: very many fish, and also more discreet transparent organisms, pass through every day. A future mission may solve the current technical difficulty.

This new equipment dedicated to environmental sciences enriches Laboratoire Sous-marin Provence Méditerranée (LSPM)2 , a permanent observatory located more than 2400 meters deep off Toulon in the Gulf of Lion. Thanks to its connection to the 45 km electro-optical cable that connects it to La Seyne-sur-Mer and the scientific junction box, LSPM equipment can be monitored and data retrieved in real time.

The oceanographic component of the LSPM belongs to the underwater observatory network of the European Multidisciplinary Subsea Observatory (EMSO). Distributed in the seas around Europe, the network’s various sites study the impact of global warming on the oceans surrounding Europe and study deep marine ecosystems, with a view to fundamental research and sustainable management.

 

See the first images captured by Bathybot at a depth of 2500 m here.

Follow Bathybot on Twitter.

On the right, Bathybot in its dock aboard the Pourquoi Pas? A 50 m blue cable connects the rover to the dock, which is in turn connected to the scientific junction box, and to the rest of the network via the orange cable.
© Cyril Frésillon / MIO / CNRS Photo library
On the left, BathyBot and BathyReef in the IFREMER Mediterranean Centre test basin.
© Dorian Guillemain

 

Find the photo report of CNRS Images on the launch mission aboard the Pourquoi Pas?

Other images, photos and videos are available on request.

  • 1The Institut Méditerranéen d’Océanologie is part of the Observatoire des Sciences de l’Univers Institut Pythéas (CNRS/INRAE/IRD/Aix-Marseille University) which groups six laboratories conducting research in environmental geosciences, biodiversity sciences and ecology, astronomy, oceanology and on how societies and the environment interact.
  • 2The LSPM is a national entity managed by the CNRS through the Institut National de Physique Nucléaire et de Physique des Particules (IN2P3), in collaboration with Aix-Marseille University and IFREMER. It is operated by teams from the Centre de Physique des Particules de Marseille (CNRS/Aix-Marseille University), which is the host laboratory for the entity. The LSPM hosts instruments from the Institut Méditerranéen d'Océanologie, the Division Technique de l’Institut National des Sciences de l'Univers du CNRS, the Institut de Physique des deux Infinis de Lyon (CNRS/Université Claude Bernard Lyon 1) and the Laboratoire Géoazur (CNRS/Observatoire Côte d’Azur/IRD). The main component of the LSPM is a large neutrino telescope deployed as part of the international KM3NeT project (for Cubic Kilometre Neutrino Telescope) and involving teams from CNRS/IN2P3 laboratories and associated French universities.

Contact

Christian Tamburini
CNRS Researcher
Séverine Martini
CNRS researcher
Carl Gojak
CNRS engineer
Jan Opderbecke
Researcher French Oceanographic Fleet Directorate at Ifremer
Viorel Ciausu
Engineer French Oceanographic Fleet Directorate at Ifremer
Olivier Bocquet
Architect and Director of the Rougerie+Tangram Lab
Olivier Martinage
Vicat Group 3D Printing Manager
François Maginiot
CNRS Press Officer